Due to a Machine Breakdown we currently have no way to manufacture steering arms until the machine is fixed, you can still place an order, but please note we do not know when we will have parts ready to ship until the machine is up and running again.
Get that Tie-Rod out of harms way! All of our Dana 60 Hi-Steer arms have been engineered with Ackermann steering geometry. The geometry has been adjusted for steering and kingpin Axis Inclination Angle - Resulting in a perfectly parallel surface between the arms.
Over time the Springs that preload the King Pin Bushings and lower bearings lose their tension resulting in vertical play in the knuckles. This can cause premature wear of King Pin components and death wobble after hitting a bump which is exaggerated with large tires. The cure to this is our King Pin Spring Eliminator System! We replace the spring with a massive greasable 1" Set Screw that preloads the King Pin Bushings and Bearings. The result is a bullet-proof design with predictable handling characteristics.
Engineered to keep ideal steering angle for Low Sprung Linked Vehicles. This arm comes drilled with 5/8" holes. This allows the arm to be reamed for TRE's or Drilled for 3/4" Bolts from the top or Bottom!