This is our New Titan Series NP205 Shorty Fixed Output Kit. Fully CNC Machined in house from 8620 Billet Steel, Heat Treated to 58-62 Rockwell, then hard turned to exact bearing tolerances. The weak links of the stock 32 spline output have been eliminated by removing the oiling groove and increasing the shaft diameter for the dual tapered roller bearings. At 3-1/4" Shorter than our Standard Titan Output and Flange Combo, this is an absolute must for all High Horse Power, Short Wheel Base Rigs!
All Kits are set-up in house to ensure proper endplay before being shipped. The Low Gear and needle bearings will need to be swapped over from the stock output before final assembly and install into the NP205.
Included in this kit is:
1x 34 Spline Titan Series NP205 Heavy Duty Shorty Output Shaft
1x 6061-T6 Billet Speedometer Housing
2x Tapered Roller Bearings + Shims
1x Thust Plate
1x 1300/1400 Series Shorty Billet Output Flange
1x VSS Reluctor Ring
1x GM Vehicle Speed Sensor
1x VSS Wiring Pigtail
1x 8 Bolt Speedometer Housing Gasket
1x Output Shaft Nut
1x Output Seal
8x 3/8 x 7/8 Hex Head Cap Screws
1x 1/4" Barb Breather Fitting
**This kit is compatible with our NP205 Transfer Case Supports (Does not require billet bearing retainer)**
**NP205 Park Brake Kits are NOT compatible with this kit**
You may also like
Recently viewed
DISCLAIMER
THIS PRODUCT IS FOR OFF ROAD USE ONLY. THE PRODUCTS SUPPLIED IN THE DELIVERED KIT ARE MANUFACTURED AND ASSEMBLED SPECIFICALLY FOR THE PURCHASED CONVERSION TYPE. ALL MODIFICATIONS TO COMPONENTS THAT HAVE NOT BEEN APPROVED OR AUTHORIZED BY NORTHWEST FABWORKS INC (NWF) WILL VOID WARRANTY AND/OR RETURNS. NWF IS NOT RESPONSIBLE FOR DAMAGED COMPONENTS THAT ARE NOT INCLUDED IN THE PURCHASED PRODUCT. NWF IS NOT RESPONSIBLE FOR DAMAGED NWF PRODUCTS CAUSED BY THE FAILURE OF NON-NWF PARTS. NWF DOES NOT COVER DAMAGE CAUSED BY INCORRECT INSTALLATION AND/OR ASSEMBLY. NWF LIMITS LIABILITY TO PRODUCT REPLACEMENT AND IS NOT LIABLE FOR LABOR, STORAGE, LOST WAGES OR OTHER COSTS ASSOCIATED WITH DOWNTIME. NWF DOES NOT WARRANTY PRODUCTS THAT HAVE BEEN USED OUTSIDE OF THEIR INTENDED USE.INSTALLATION OF THE FOLLOWING PRODUCT MAY VOID AUTOMOTIVE MANUFACTURER WARRANTY.